So you recently moved into a new home and you noticed it has a satellite TV system. The problem is you prefer to use an aerial to pick up local terrestrial broadcasts (Freeview, etc) instead of the satellite channels that are unreliable.Get more news about a href="http://www.junonelectrical.com/"Metal Distribution Boards/a,you can vist our website!
Is there a way that you can modify the current system? Instead of replacing the cables that probably route through your home, can you use a satellite cable for TV aerial? Or can you use a satellite dish to pick up those channels? I was wondering the same, so I decided to do some digging and tests, what I found might surprise you.
Yes. Satellite TV and aerials use the same coaxial cable. You can use a satellite cable with a TV aerial but you may need to change the connector to an F-Type that’s compatible with TVs, top boxes, and other devices.
Even if the original satellite cable is old, it can still carry HD signals. If you have the option, I recommend replacing the coaxial cables with WF-100 coaxial cables because those are more durable and less prone to interference. For more information, take a look at our list of best coaxial cables. +
In most cases, converting a satellite cable to be used on a TV aerial is not as difficult as it sounds. The good news is satellite TV and aerials both use coaxial cables, which can also be used for cable TV subscriptions, internet, and other services, it’s a highly versatile cable. Before you tinker with any wires, make sure to double-check your setup to clarify what you need.
The main issue you’ll have is changing the connectors, from satellite to the connectors on either your TV or top-box. In most cases, if your TV has a Freeview tuner, it will probably have an F-connector port. If it doesn’t, you might need to buy a cheap Freeview box that has one. There are also some cases where your satellite cable already uses F-connectors.
In that case, unscrew the end that attaches to the satellite and re-attach it to your aerial. You can even place the aerial near the satellite or clipped on onto it. The other end of the cable would connect to your TV or top-box.
The end that connects to your TV will probably already have an F-connector fitted. But if your satellite connection uses a different coaxial connector, you will need to refit the cable with an F-connector which we’ll talk about in a moment.
